Technology

ADAPTIVE CONTACT LENGTH

Technology

The widest point on the shovel is set further forward. Together with a slight rocker (more gradual up-bend of the shovel), the more the ski is tilted, the further forward the contact point of the edge with the snow moves. This preserves its nimble characteristics without sacrificing stability and grip during the turn.

Benefits
  • The greater the tilt, the higher the stability and sense of security
  • Playful and good-natured at lesser tilt angles
Technology

Bamboo Side Walls

Technology

Sidewalls made of natural bamboo fibers

Benefits
  • More resistant against blows
  • Optimized power transfer
  • Natural product, sustainably produced
Technology

Big Powder Rocker

Technology

The height (20 mm) and length (60 mm) of this rocker are designed for powder adventures. It gives the ski plenty of lift and top maneuverability. For playful and effortless skiing in deep snow.

Benefits
  • Optimum float
  • Energy-saving skiing in deep powder
  • Better control
Technology

Carbon Power Turn

Technology

Carbon strip inserts around the binding plate area underneath the wood core. Carbon fibers running lengthwise are tensioned during the initiation phase of the turn and release during the finish of the turn, effectively creating an extra explosive acceleration.

Benefits
  • Stronger acceleration
  • Quicker edge switching
  • Improved agility
Technology

Carbon Steering Control

Technology

CSC Technology was successfully used in the Alpine Skiing World Cup. The carbon laminate visibly recognizable in the window is glue-laminated as appropriate for each end point. In the flex line, the carbon laminate flexes ideally so that the ski loses none of its perfect tuning. On strong impacts, the carbon laminate comes under tension through its specialized glue laminate at the ends, which results in less flattening out on the snow.

Benefits
  • Superlative smooth running
  • Increased stability
  • Perfect control, even under tough conditions
Technology

Flex Torsion Control

Technology

An S-shaped notch in the aluminum at the shovel and tail of the ski offers softer flex and torsion at the front and rear. As a result, the ski exhibits more torsional flex, making it easier to initiate turns. At the same time, when changing direction, the ski remains under control because the torsion can adapt.

Benefits
  • Improved control when changing direction
  • Easier steering in and out of turns
Technology

Freeride Tail

Technology

Special tail area. The use of a high-tech polymer in combination with a new rocker angle results in the tail being both lighter and softer. The ski is even more responsive and maneuverable as a consequence.

Benefits
  • Reduced weight
  • Playful and nimble
Technology

Freeride Tip Technology

Technology

Light, stiff insert material at the tip makes the shovel more stable and less jittery. This light Freeride Tip material helps generate more lift in deep snow.

Benefits
  • Improved lift with lower swing weight and more stable shovel
  • Easy, effortless skiing in all snow conditions
Technology

Full Edge Contact

Technology

The widest points of the ski are set further forward or back. This makes the shovel grip faster and the part of the edge in contact with the snow when the ski is tilted becomes longer.

Benefits
  • Easier, faster turn initiation
  • Improved grip in the turn due to the longer contact area
Technology

Laser 3.0 Top Sheet Structure

Technology

New surfaces on the Laser models. Combining three different textures, the skis gain a unique, classy and athletic look. Every ski is unique.

Benefits
  • Durable (scratches are less visible)
  • Eye-catching
Technology

Light Core & Super Light Core

Technology

Particularly light European wood species are deployed in the all-mountain, freeride/off-piste and touring segments. This makes the core a little softer and suppler, which lends the ski dynamism and makes it very durable.

Benefits
  • Reduced weight due to ultralight cores
  • dynamic ski response
  • very durable
Technology

Natural Fiber

Technology

Use of ecological raw materials in ski production. NEW: Bamboo fibers

Benefits
  • highly flexible thanks to long bamboo fibers
  • purely natural product
Technology

POLYWALL

Technology

This sidewall is slightly softer and therefore more elastic than the phenolic sidewall. It exhibits damping properties and thus boasts significantly higher impact resistance.

Benefits
  • Highly robust
  • High impact resistance
  • Damping properties
Technology

Race Base

Technology

This coating has a higher graphite content compared to a conventional coating, thus offering even better gliding properties. The higher graphite content makes the coating highly abrasion resistant: less dust and other particles in the snow are able to penetrate the coating and cause a braking effect.

Benefits
  • Better gliding properties in all snow conditions
  • Abrasion resistant coating
  • More resistant to dust and particle ingress
Technology

Racing Edge

Technology

The special die-cutting procedure is typical of racing and improves the bond between edge and ski. For top performance and direct power transmission.

Benefits
  • Faster acceleration out of turns
  • Optimal edge grip
  • Increased stability
Technology

RACING SIDEWALLS BLACK

Technology

Phenol sidewalls with a harder resin plus carbon black, which leads to greater stability and a more direct power transfer.

Benefits
  • Faster and more direct power transmission
  • Improved agility when switching edges
Technology

Rocker

Technology

The gradual bending up of the ski at its tip and tail is called the rocker. Stöckli modifies the rocker according to the type of ski. Typically, the longer and more pronounced the rocker, the more lift is generated and the more responsive and easy-turning the ski becomes.

Benefits
  • better float in powder
  • Less effort required
  • easier to turn on pistes
  • easier edging
Technology

Sandwich Sidewall Technology

Technology

The ski is built up layer-by-layer, with each layer glued together under pressure - a well-proven manufacturing process in ski construction

Benefits
  • optimum energy transfer
  • optimum precision
  • heavy-duty construction
Technology

Size Optimized Construction

Technology

The construction of these models changes according to the length. The shorter lengths are typically made a little lighter and softer compared to the longer lengths. The aim is to provide an optimal match between the ski’s handling characteristics and the skier’s physique.

Benefits
  • Perfectly matched construction whatever the length
  • The ski’s dynamics are adapted to the skier’s physique
  • Weight reduction at shorter lengths
Technology

Softflex

Technology

The individual layers are thinner and some models feature lighter materials. This lends the ski a softer flex. Light skiers, especially, benefit from the enhanced bending characteristics which offer enhanced enjoyment with less effort.

Benefits
  • Optimal ski deflection
  • Less effort required for improved comfort
  • Reduced weight
Technology

Solid Metal Edge

Technology

Wider than conventional edges. This not only increases the service life of the ski, but also pays off in the rental/lending sector, where the equipment is subjected to particularly heavy use. A wider edge also makes the ski a little more stable.

Benefits
  • Longer service life
  • Reduced susceptibility to damage
  • More grinding possible
  • Increased stability
Technology

Solid Metal Edge Light

Technology

Same edge width as the SME. A modified die-cutting procedure, however, means the edge is inserted less deeply into the ski, which saves weight.

Benefits
  • Longer service life
  • Reduced susceptibility to damage
  • More grinding possible
Technology

Tail Rocker

Technology

Rocker: A longer rocker at the tail with a flatter radius.

Benefits
  • With the longer, extended rocker, the edge in contact with the snow is decreased, making the ski more playful.
  • The longer rocker enables optimum grip when edging.
Technology

Thin Glass Laminate

Technology

This fiberglass laminate is 25% lighter than its conventional counterpart. The optimized material composition maintains the stiffness of the fiberglass and thus the ski’s handling characteristics.

Benefits
  • Lighter in weight, same degree of flex
Technology

TITANAL TECHNOLOGY

Technology

No conventional cover sheet. Instead, the top layer of Titanal is coated with a powder. The design is then applied directly to the Titanal by means of transfer printing. This produces weight savings and results in a special visual appearance.

Benefits
  • Optical effect
  • Reduced weight, as the polyamide surface is done away with and the graphics are printed directly on the Titanal
Technology

TITANAL TECHNOLOGY EVO

Technology

Special powder coating on the Titanal surface of the touring skis inspired by the water-repellency of the lotus flower.

Benefits
  • Reduces the accumulation of snow on the ski surface
  • Enhanced scratch resistance
  • Agreeable haptic
  • Reduced weight, as the graphics are printed directly on the Titanal
Technology

Titanal Technology Pro

Technology

An additional protective coating featuring a slightly raised structure is applied to the Titanal surface. This affords the ski better protection from scratches on the top surface and gives it a special haptic.

Benefits
  • Enhanced scratch resistance
  • Agreeable haptic
  • Optical effect
  • Reduced weight, as the graphics are printed directly on the Titanal
Technology

Torsion Racing Technology

Technology

Lengthwise cuts at the tip and tail provide more control and tolerance. The ski does not react overly aggressive at the beginning and end of the turn.

Benefits
  • Improved curve technique
  • Energy savings and less effort
Technology

TOURING SUPER LIGHT EDGES

Technology

These special edges for touring skis are not as wide or as high as traditional alpine edges.

Benefits
  • Weight savings (up to 25% lighter than SME light)
Technology

TOURING TAIL

Technology

Our touring skis feature special milling at the tail end to facilitate the attachment of climbing skins. The hook at the end of the skin is afforded additional protection by the milling of the tail guard. Very practical when it’s cold or you have to get a move on. This feature also makes the end of the ski a little softer and smoother.

Benefits
  • Secure attachment of climbing skins
  • Reduced weight
  • Softer torsion at the tail of the ski
Technology

TURTLE GRIP

Technology

New surfaces on Laser X models. Slightly nubby texture creates a matte/shiny surface that imparts an elegant look to the design. The top graphics layer is also rugged.

Benefits
  • Nicer feel
  • A real eye-catcher
Technology

TURTLE SHELL

Technology

The cut-outs in the Titanal lend torsion neutrality and effortless skiing at a low speed on easy slopes. At higher tempos and rough slopes the Titanal cutouts interlock. With these cut-outs, the ski is more stable, smoother, and thus lends more security.

Benefits
  • Torsionally neutral and smooth at leisurely paces and on simple slopes.
  • Athletic and stable at higher tempos on rougher slopes.
Technology

Vario Racing Technology

Technology

Like the core, the upper Titanal layer also has a thickness profile. The Titanal layer is thinner at the ski‘s tip and tail. VRT technology has been incredibly successful in competitive racing.

Benefits
  • improved control and precision
  • direct and harmonious turn initiation
Technology

Vario Side Cut

Technology

The ski width is proportionate to the length of the ski. The longer the ski, the wider it is and the more contact it has with the snow. This allows a good relationship to be established between the height and weight of the skier and the width, and therefore the weight, of the ski.

Benefits
  • Identical center width to ski length ratio in every length
  • The shape and width of the ski adapts to the skier’s physique
https://www.stoeckli.ch/media/contentmanager/content/ACL
ACL
https://www.stoeckli.ch/media/contentmanager/content/BSW
BSW
https://www.stoeckli.ch/media/contentmanager/content/BPR
BPR
https://www.stoeckli.ch/media/contentmanager/content/CPT
CPT
https://www.stoeckli.ch/media/contentmanager/content/CSC
CSC
https://www.stoeckli.ch/media/contentmanager/content/FTC
FTC
https://www.stoeckli.ch/media/contentmanager/content/FTA
FTA
https://www.stoeckli.ch/media/contentmanager/content/FTT
FTT
https://www.stoeckli.ch/media/contentmanager/content/FEC
FEC
https://www.stoeckli.ch/media/contentmanager/content/TSS
TSS
https://www.stoeckli.ch/media/contentmanager/content/LC & SLC
LC & SLC
https://www.stoeckli.ch/media/contentmanager/content/NF
NF
https://www.stoeckli.ch/media/contentmanager/content/PWA
PWA
https://www.stoeckli.ch/media/contentmanager/content/RBA
RBA
https://www.stoeckli.ch/media/contentmanager/content/RE
RE
https://www.stoeckli.ch/media/contentmanager/content/RSB
RSB
https://www.stoeckli.ch/media/contentmanager/content/Rocker
Rocker
https://www.stoeckli.ch/media/contentmanager/content/SST
SST
https://www.stoeckli.ch/media/contentmanager/content/SOC
SOC
https://www.stoeckli.ch/media/contentmanager/content/SF
SF
https://www.stoeckli.ch/media/contentmanager/content/SME
SME
https://www.stoeckli.ch/media/contentmanager/content/SME Light
SME Light
https://www.stoeckli.ch/media/contentmanager/content/TR
TR
https://www.stoeckli.ch/media/contentmanager/content/TGL
TGL
https://www.stoeckli.ch/media/contentmanager/content/TITEC
TITEC
https://www.stoeckli.ch/media/contentmanager/content/TITEC EVO
TITEC EVO
https://www.stoeckli.ch/media/contentmanager/content/Titec Pro
Titec Pro
https://www.stoeckli.ch/media/contentmanager/content/TRT
TRT
https://www.stoeckli.ch/media/contentmanager/content/TSLE
TSLE
https://www.stoeckli.ch/media/contentmanager/content/TT
TT
https://www.stoeckli.ch/media/contentmanager/content/TGR
TGR
https://www.stoeckli.ch/media/contentmanager/content/TS
TS
https://www.stoeckli.ch/media/contentmanager/content/VRT
VRT
https://www.stoeckli.ch/media/contentmanager/content/VSC
VSC
nav slider go bottom

Ski Finder

MADE WITH EXPERT FINESSE

We only have one goal in sight with all of our sculpting, adjusting and testing: to always achieve the most unique ride with every turn you make on a St棫li ski. To that end, we combine innovative technology with fiercely passionate handwork. Both CAD programs and CNC ski mills ensure precision just as too does the experienced eye of every single associate. St棫li skis are unique pieces made from premium materials, such as wood, bamboo or carbon fiber, handcrafted chiefly in the heart of Switzerland..* *except Stöckli AXIS and Stöckli Kid’s skis

Find your skis